• Acidic cleaners can etch and permanently dull the surface
• Abrasives can scratch polished onyx quickly
• Strong chemicals can discolor lighter onyx over time
• In wet areas, residue and minerals can create a cloudy look

• Soap residue and film in showers
• Water spots and mineral deposits
• Dull or etched looking areas from improper cleaners
• Smudges and streaks on polished finishes
• Grout lines that distract from the stone

What You Need:

• ÁTHOS Bathroom Cleaner
• Microfiber Towels
• Optional, Deep Cleaning Brushes for grout only, keep brushes off polished stone
• Optional, a second dry towel for immediate drying

Steps:

1. Rinse the surface first, do not scrub dry grit into the stone.
   
2. Spray ÁTHOS Bathroom Cleaner lightly across the onyx.
   
3. Let it sit for 2 to 3 minutes.
   
4. Wipe gently with a soft Microfiber Towel, use light pressure.
   
5. Rinse thoroughly.
   
6. Dry immediately with a second clean towel to prevent water spots.

What You Need:

• ÁTHOS Multi Surface Cleaner
• Microfiber Towels

Steps:

1. Remove crumbs and dust first.
   
2. Spray ÁTHOS Multi Surface Cleaner onto your Microfiber Towel, then wipe the onyx.
   
3. If needed, follow with a slightly damp towel to remove any remaining residue.
   
4. Dry buff right away for an even, polished look.

• Vinegar, lemon juice, or citrus based cleaners
• Acidic bathroom sprays or limescale removers
• Bleach heavy products
• Abrasive scrubbing pads or powder cleaners
• Stiff brushes on polished stone

Ready to experience the ÁTHOS difference? Our Starter Bundles give you everything you need to protect your natural stone surfaces while saving money.